Michigan USA Raptor 900 User Manual Download

Page: 12 / 26

Raptor 900 Compact Wood Chipper/Shredder

E&OE

Environmental Considerations

Altitude

– If the engine is being used in altitudes at or above 1500m (approximately 5000'), adjustments to

the fuel system may be required. This is because there is less oxygen in the air as altitude increases, which

effectively "enriches" the ratio of fuel to air going into the engine, and the higher the altitude, the richer the

fuel mixture becomes. If the engine is being permanently operated at high altitude, it is recommended to

have an authorised service centre make the necessary carburettor adjustments. If the engine is used

occasionally at altitude (not extreme altitudes), no adjustments should be required, however, a slight

decrease in engine performance can be expected.

Temperature

– If the engine is being used in extremely cold or hot

environments; for example, desert or snow conditions, the type of

engine oil may need to be changed to suit environmental

temperatures. Oil thickens as the temperature decreases and thins as

temperature increases, which means that if the engine oil is not suited

to the temperature its ability to properly lubricate the engine may be

affected. Use the following chart to determine the correct engine oil:

MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN

Summary of Contents for Raptor 900



























Search results

Summary of Contents for Raptor 900

Reviews:

Related manuals for Raptor 900

Brands by name

Popular brands

Michigan USA Raptor 900, User Manual

Search results

Summary of Contents for Raptor 900

Reviews:

Related manuals for Raptor 900

Brands by name

Popular brands