MICHIGAN Ravenger 1950 User Manual Download

Page: 11 / 28

Ravenger 1950 Wood Chipper and Shredder

E&OE

Environmental Considerations

Altitude

If the engine is being used in altitudes at or above 1500m (approximately 5000’), adjustments to the

carburettor may be required. This is because there is less oxygen in the air as altitude increases, which

effectively “enriches” the ratio of fuel to air going into the engine and the higher the altitude, the richer

the fuel mixture becomes. If the engine is being permanently operated at high altitude, it is

recommended to have an authorized service centre make the necessary carburettor adjustments. If the

engine is used occasionally at altitude (not extreme altitudes), no adjustments should be required,

however, a slight decrease in engine performance can be

expected.

Temperature

If the engine is being used in extremely cold or hot

environments; for example, desert or snow conditions, the type

of engine oil may need to be changed to suit environmental

temperatures. Oil thickens as the temperature decreases and

thins as temperature increases, which means that if the engine oil is not suited to the temperature its

ability to properly lubricate the engine may be affected. Use the following chart to determine the correct

engine oil:

MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN

Summary of Contents for Ravenger 1950





























Search results

Summary of Contents for Ravenger 1950

Reviews:

Related manuals for Ravenger 1950

Brands by name

Popular brands

MICHIGAN Ravenger 1950, User Manual

Search results

Summary of Contents for Ravenger 1950

Reviews:

Related manuals for Ravenger 1950

Brands by name

Popular brands