MICHIGAN Ravenger 1950 User Manual Download

Page: 9 / 28

Ravenger 1950 Wood Chipper and Shredder

E&OE

4. Using a funnel, carefully fill the tank with fuel. Do not fill above the top of the strainer (if equipped) or

otherwise overfill the tank.

5. When finished, re-install (rotate right) the fuel filler cap until firm. Wipe away any residual fuel from

the machine. If fuel has been spilt, move the machine away from the spillage before starting the

engine.

Spark Plug

The spark plug may come disconnected from the spark plug lead. If this is the case, place the electrical

lead over the spark plug terminal and push it down so that it connects firmly with the terminal. See

Spark Plug Removal/Installation

MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN MICHIGAN

Summary of Contents for Ravenger 1950





























Search results

Summary of Contents for Ravenger 1950

Reviews:

Related manuals for Ravenger 1950

Brands by name

Popular brands

MICHIGAN Ravenger 1950, User Manual

Search results

Summary of Contents for Ravenger 1950

Reviews:

Related manuals for Ravenger 1950

Brands by name

Popular brands