EDM MD-S Series
Installation Manual
Page 22 of 23
EC Declaration of Incorporation
Name of manufacturer:
KENWA CO., LTD.
Address of manufacturer:
6th Floor, Marutake Honmachi Bldg, 1-6-18, Chuo-Ku Osaka 541-0053, Japan
In accordance with the follow-
ing Directive:
2006/42/EC The Machinery Directive
We hereby declare that for the partly completed machinery identified as:
Equipment:
Automatic Sliding Door Operator
Model Number:
EDM-MD
Serial Number:
The following EHSRs have been complied with:
-
Annex I of 2006/42/EC, except the following clauses:
1.1.7
1.2.4.3
1.4.3
1.5.4
1.6.2
-
EN ISO 12100:2010
-
EN 60335-1:2012+A11:2014
-
EN 60335-2-103:2015
and the technical documentation is compiled in accordance with Annex VII (B) of the Directive.
We undertake to transmit, in response to a reasoned request by the appropriate national authorities, relevant information on
the partly completed machinery identified above. The method of transmission shall be by mail. This partly completed machinery
must not be put into service until the machinery into which it is to be incorporated has been declared in conformity with the
provisions of the Directive.
Responsible for making this declaration is the:
Manufacture’s Name
: KENWA CO., LTD.
Manufacturer’s Address
: 6
th
Floor, Marutake Honmachi Bldg, 1-6-18, Chuo-Ku Osaka 541-0053, Japan
Authorized Rep’s Name
:
Authorized Rep’s Ad-
dress
:
Person responsible for compiling the technical files established within the EU
Name, Surname
: Mr. Steven Liddle / C.O.O
Address
: The Grainger Suite, Dobson House, Regent Centre, Gosforth Newcastle
Upon Tyne. NE3 3PF
Person responsible for making this declaration:
Full name / Position
: Ms. Seiko Harada / Manager
Place / Date
: Osaka, Japan
_____________ ______________ __________________________________
(Place) (Date) (Company stamp and legal signature)
