MICOM SWING SW & SWSP
Installation Manual
Page 6
1. INTRODUCTION
This instruction manual contains all the information to carry out the installation, maintenance and service
of the MICOM SWING SW and SWING SWSP operators
.
These operators are used for to automate swing doors of either one or two panels, both for inside
and outside, opening inwards or outwards.
The mechanism incorporates an opening limiter inside, it is not necessary to have any stopper on the
floor or wall.
The difference between the operators MICOM SWING-SW and MICOM SWING-SP is:
SW: Power Close
SWSP: Spring Close
The MICOM SWING is a non handed swing door operator system is to be utilized for automatic
swinging pedestrian doors. It is suitable for Single and Double applications. Its small size and
attractive housing design will compliment the aesthetics of any door. MICOM SWING SW & SWSP is
very compact, durable and high-quality automatic swing door operator system.
MICOM SWING operator is totally reversible and therefore it can be adapted without needing to
change the mechanics or the programming. It can accommodate Left and Right Push as well as Left
and Right Pull applications.
INSTALLATIONS
– TO FOLLOW
