Micrel Confidential
5
June 2006
2180 Fortune Drive, San Jose, CA 95131, USA
•
(408) 944-0800
•
http://www.micrel.com
KSZ8862-16 MQL Demo Board User’s Manual
4
System Connectivity
Figure 1 shows the connectivity for program OpenTCP driver or development. The
following lists the hardware and software products that are required by the Demo Board
to program OpenTCP driver or download the update OpenTCP driver.
•
Host Computer
•
KSZ8862-16 MQL Demo Board
•
+7.5V DC Power Supply
•
RTA-FoUSB-MON In-Circuit Debugger (sold separately)
•
Mini USB Cable (sold separately)
•
Target Cable (sold separately)
•
Software Tools (FoUSB Programmer and other development tools)
Note: RTA-FoUSB-MON ICD, Mini USB Cable and Target Cable are ordered and
manufactured from Renesas Technology America, Inc. (www.renesas.com)
Address: 450 Holger Way, San Jose, CA 95134-1368 USA
Phone: 408-382-7500, Fax: 408-382-7501
Figure 1: System Connectivity with ICD for Program the OpenTCP Driver
After program the OpenTCP driver, the demo board will be a standard alone two-port
switch or a single port MAC controller with microprocessor and management function.
