background image

1

SY87729/39L

 Evaluation Board

Micrel, Inc.

M9999-071906
hbwhelp@micrel.com or (408) 955-1690

DESCRIPTION

DC coupled and terminated PECL inputs

AC coupled PECL outputs

Programmable via any PC using printer cable

Includes a 27.0000MHz oscillator on board

FEATURES

SY87729L 10MHz to 365MHz
SY87739L 10MHz to 729MHz
FRACTIONAL-N SYNTHESIZERS

SuperCOM™

SY87729L
SY87739L

Evaluation Board

EVALUATION BOARD COMPONENTS

SY87729/39L evaluation board

SY87729/39L data sheet and this document

SY87729/39L software (download from
http://www.micrel.com/product-info/
fractional_n_synthesizers.shtml)

Two length-matched 1 foot SMA cables (optional,
user supplied)

PC running Windows (user supplied)

Printer cable, parallel-to-centronics (user supplied)

Rev.:  B

Amendment: /0

Issue Date:

July 2006

The SY87729/39L are rate independent fractional-N

frequency synthesizer ICs. From a single reference source,
they can generate any clock frequency from 10MHz to
729MHz very accurately.

This document provides a detailed description of the

evaluation board, evaluation procedure and the simple
configuration software it uses. Complete information in this
document includes:

1. Test setup and measuring frequency output with

a signal generator.

2. Test setup and measuring jitter with an internal

reference oscillator.

3. Download and use of the configuration software

4. Board schematic and Bill of Materials.

SuperCOM is a trademark of Micrel, Inc.

Power
Banana Jack
(J1)

Synthesized
Clock Outputs

Reference

Oscillator

Outputs

Reference

Clock Inputs

Centronics

Programming Port

Ground
Banana Jack
(J2)

Summary of Contents for SY87729L













Reviews: