Page 15
Installation and Assembly
induSENSOR DTD / MSC7xxx
4.
Installation and Assembly
4.1
Precautions
No sharp or heavy objects should be allowed to affect the cable sheath of the sensor cable or the supply/out-
put cable. Avoid folding the cables
> Damage to or destruction of the sensor cable and/or controller
Do not bend more tightly than the minimum bending radius of the cables.
> Damage or destruction of the cables
> Failure of the measuring device
Check all plug-in connections for firm seating before starting operation.
i
Ensure careful handling during installation and operation.
In addition with the DTD model:
i
Avoid cyclic movements of the crimps and ferrite of the sensor cable. In the case of cyclic movements
(e.g. use in a drag chain), fix the sensor cable additionally with suitable means.
