Page 1
scanCONTROL 25xx
Assembly Instructions
scan
CONTROL
2500 / 2510
1.
Warnings
Connect the power supply and the display/output device according to the safety
regulations for electrical equipment. The supply voltage must not exceed the specified
limits.
> Risk of injury, damage to or destruction of the sensor
> Avoid shocks and impacts to the sensor. Avoid constant exposure of the sensor to
dust and splashes of water. Avoid exposure of sensor to aggressive media (deter-
gents, cooling emulsions).
> Damage to or destruction of the sensor
2.
Notes on CE Marking
The following apply to the scanCONTROL 25xx measuring system:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU
The measuring system is designed for use in industrial applications.
The measuring system satisfies the requirements if the guidelines in the operating inst-
ructions are maintained in installation and operation.
3.
Proper Environment
- Protection class: IP65
- Temperature range:
Operation:
0 ... +45 °C (+32 ... +113 °F), when air is circulating freely
Storage:
-20 ... +70 °C (-4 ... +158 °F)
- Humidity:
5 - 95 % (non-condensing)
