Page 6
Safety
surfaceCONTROL 2500
1.3
Notes on CE Marking
The following apply to the surfaceCONTROL 2500:
-
EU Directive 2014/30/EU
-
EU Directive 2011/65/EU
Products which carry the CE mark satisfy the requirements of the EU directives cited and
the relevant applicable harmonized standards (EN). The measuring system is designed
for use in industrial environments.
The EU Declaration of Conformity is available to the responsible authorities according to
EU Directive, article 10.
1.4
Intended Use
-
The surfaceCONTROL 2500 measurement system is designed for use in industry and
laboratories. It is used for
non-contact optical measurement of diffuse reflective surfaces
quality monitoring and surface inspection
-
The sensor must only be operated within the limits specified in the technical data
.
-
The sensor must be used in such a way that no persons are endangered or machines
and other material goods are damaged in the event of malfunction or total failure of
the sensor.
-
Take additional precautions for safety and damage prevention in case of safety-related
applications.
1.5
Foreseeable Misuse
Operation during high incidence of external light
> Incorrect capture of the surface
> Incorrect inspection result
Changing light conditions during the measurement
> Incorrect capture of the surface
> Incorrect inspection result
Operation with misaligned lens / shutter
> Incorrect capture of the surface
> Incorrect inspection result
