Page 128
Merging
thermoIMAGER TIM Connect
Under
Config merged imager
, further settings can be made for all instances, see
Fig. 124
.
Fig. 124 View Config merger
With
Synchronize frames by digital input (DI) of PIF
, the frames of the connected cameras
are simultaneous synchronized using the PIF.
Mix overlapped edges
makes a smooth transition between the singles images. It will be interpolated.
With
Adjust secondary imager(s) to master imager
, an adaptation of the pixels of the individual
slave imagers to the master imager within the set temperature range is performed in the overlapping area.
The set temperature value at
maximum adjustment offset
indicates the maximum offset adjustment.
If the checkmark is set to
Ignore margin pixels
, the set margin pixel is not taken into account. A fixed
number of margin pixels in the overlapping area does not work during line scanning when the gap is very
narrow. Then no valid pixels are found.
Under
After flag operation only
, the pixels are adjusted only after a drawn flag and not continuously.
Keep adjustment after restart ensures that the calculated offset of the secondary imager is preserved for the
merging after program end.
