background image

Warranty

For warranty service call: 1-800-544-0400. Please have the model number and serial number.

  www.micromatic.com   •   1 (866) 327-4159

Installation, Use & Maintenance

22

Pro-Line Wine

Warranty Claims Procedure:
If there is a defect in material or factory workmanship covered by this 
Warranty reported to Micro Matic during the period the applicable 
Warranty is in force and effect, Micro Matic will repair or replace, at 
Micro Matic’s option, that part of the Equipment that has become 
defective.  Micro Matic will cover labor cost within one year from 
the Warranty Commencement date or 15 months from shipment 
date, whichever occurs first.  Micro Matic shall bear all labor costs in 
connection with the installation of these replacement parts, provided 
that, the installation is conducted by Micro Matic or its authorized 
representative.  Charges for warranty travel time to round trip total of 
(2) two hours or up to 100 miles total.  Any charges exceeding those 
stated herein or overtime rates must have prior authorization by 
Micro Matic.

Additional Four Year Compressor Part Warranty:
In addition to the warranty set above. Micro Matic warrants the 
compressor (part only) for an additional four (4) years based on the 
installation date. This warranty is for defects both in workmanship and 
material under the normal and proper use and maintenance service.  
The four (4) year extended warranty only applies to hermetically 
sealed parts of the compressor and does not apply to any other part 
or component, including, but not limited to cabinet, temperature 
control, refrigerant, motor starting equipment, fan assembly, or any 
other electrical or mechanical component.

The original purchaser shall be responsible for returning the defective 
compressor to Micro Matic prepaid. This warranty shall be void if the 
compressor, in Micro Matic’s sole judgment, has been subjected 
to misuse, neglect, alteration or accident, operated contrary to the 
recommendations specified by the Unit manufacturer, repaired or 
altered by anyone other than Micro Matic in any way so as, in Micro 
Matic’s sole judgment, to affect its quality or efficiency or if the serial 
number has been altered, defaced or removed. This warranty does 
not apply to a compressor in any unit that has been moved fro the 
location where it was originally installed.

Parts Warranty Coverage:
Micro Matic warrants all new machine parts produced or authorized 
by Micro Matic to be free from defects in material and workmanship 
for a period of 90 days from the Warranty Commencement Date.  If 
any defect in material and workmanship is found to exist within the 
warranty period, Micro Matic will replace the defective part without 
charge.  Defective parts become the property of Micro Matic.

Micro Matic will have no responsibility to honor claims received 
after the date the applicable Warranty expires.  Notwithstanding the 
foregoing, any claim with reference to the Equipment or any parts 
therefore for any cause shall be deemed waived unless submitted 

by the User to Micro Matic within thirty (30) days after the date the 
User discovered, or should have discovered, the claim.  In connection 
with all claims under this Warranty, Micro Matic will have the right, at 
its own expense, to have its representatives inspect the Equipment 
at the User’s premises and to request all of User’s records pertaining 
to the Equipment to determine whether a defect exists, whether the 
conditions set forth in this Warranty have been satisfied, and whether 
or not the applicable Warranty is in effect.

Exclusions from and Conditions to Warranty Coverage:
This Warranty does not cover parts or accessories, which (a) carry the 
warranty of a supplier or (b) are, abused.  Application of this Warranty 
is further conditioned upon the following:

Installation:
The Equipment must be properly installed in accordance with Micro 
Matic’s installation procedures. 

No Alteration:
The Equipment must not have been modified or altered from its 
condition at the date of original installation. Any alteration from 
factory settings on thermostats will void warranty.

Use. Micro Matic equipment in not designed for personal, family or 
household purposes, and its sale for such purposes is not intended.  
in the event the equipment is so used, this warranty shall be null 
and void, and the equipment shall be deemed to have been sold 
“as is-where is” without any warranty of any kind, including without 
limitation any warranty of title, non-infringement, merchant-ability or 
fitness for a particular purpose.

Proper  Maintenance  and  Operation.  The  Equipment  must  be 
properly maintained and operated in accordance with Micro Matic’s 
maintenance and operating procedures.  All service, labor and 
parts must be acquired from Micro Matic or its authorized service 
representative for the User’s area.

This warranty is void if failure is a direct result of handling and/or 
transportation, fire, water, accident, misuse, acts of god, attempted 
repair by unauthorized persons, improper installation, if serial 
number has been removed or altered, or if unit is used for purpose 
other than it was originally intended.

Failure to comply with any of these conditions will void this Warranty.  
In addition, this Warranty does not cover defects due to apparent 
abuse, misuse or accident.

Summary of Contents for MDD23W Series

























Reviews: