TROUBLESHOOTING
HOSE DOES NOT WIND UP
* The impeller of the turbine is blocked by foreign matter.
Solution-
Remove the turbine cover and clean
the housing.
* The gun is partly clogged and only a small amount of
Solution-
Proceed to clean out gun nozzle.
water comes out.
* The injection nozzle in the turbine is clogged.
Solution-
Disassemble the hose at the turbine
entry and clean out.
* The gun nozzle is too small, compared to the machine .
Solution-
Replace with a larger gun nozzle or a
model.
smaller injection nozzle.
* Not enough water volume or pressure at the machine
Solution-
Increase volume and/or pressure.
inlet.
* The gearbox has been damaged.
Solution-
Repair the gearbox.
MACHINE WON’T STAY ANCHORED OR SLIDES
* The machine legs are improperly placed.
Solution-
Reposition leg to create more friction.
* The hose is on damp soil or grass which produces too
Solution-
Wait until the soil has dried or pick up
much drag.
hose and place blocks of wood under
in order to reduce friction.
RECOMMENDATIONS
* When moving the machine never exceed the maximum speed of 7 MPH.
* If the hose is wound up using the PTO, be certain the gearbox is in the idle or disengaged position, or the
gearbox will be seriously damaged.
* At the beginning of each season, completely unwind the hose, leaving only two wraps on the reel.
*
ANY MODIFICATION MADE TO ANY PART OF THE MACHINE WILL VOID THE
WARRANTY.
* If the hose remains unwound on the ground for an extended period of time ( several hours ), it may stick
to the ground. Prior to starting the machine, take a rope and drag underneath the tube from one end to
the other, avoiding any damage due to too much friction.
* If the machine is being used on several short fields, the hose may miswrap, or not continue to roll up
correctly. If this happens, unwind the hose with only two wraps remaining on the drum, allowing the
machine to rewind properly.
*
THE MACHINE MUST NOT BE OPERATED WITHOUT THE PROTECTION GUARDS
*
IMPORTANT!! Failure to observe these instructions, the use of non original spare parts, or
unauthorized changes to the machine will void the warranty.
17
