7
ssembly nstructions
Your Micro Rain traveler is packaged for protection during shipping with the guncart and sprinkler
head dis-assembled. The instructions below will step you through the assembly of the guncart and
attaching the guncart onto the end of the poly hose. Please follow these instructions carefully to
ensure that your traveler is assembled properly upon start up. If you have any questions, call for
technical assistance at 800-373-9325.
1. Cut strapping and remove Micro Rain and guncart from pallet.
Remove the snap ring on the end of the guncart axle and slide
wheels onto guncart axle and re attach snap ring and washer
as shown above. Attach sprinkler head as shown above.
2. Pull and lock anti-reverse knob to release reel allowing hose
to unwind.
3. Untie hose end and pull hose through hose guide bars.
4. Cut the end of the poly hose off just past the notched section
that is used for shipping.
(Keep hold of the hose end still
attached to the machine so that it does not slip back through
the guide and uncoil any wraps on the machine. Always keep
machine coils tight!)
Summary of Contents for MR43
Page 1: ......