USER MANUAL
m crob t
RRC-1258 MKII
Ba1258B_RemoteRig_MkIIs-A30
Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. A30
– 2014 Jan 21
141 of 228
Adapter ¼”” to 3.5 mm Headset adapter
Adapter ¼”” to 3.5 mm Paddle adapter
Adapter 3.5 mm to ¼” Headset output
adapter from remote remote radio
Control-RRC:
Connect the RS-232 cable Y5d between the Control-RRC COM2 and the CAT connector on
the Radio.
The microphone can be connected direct to the RRC AUX/MIC connector if you have a
microphone with RJ-45 connector. If you have a microphone with a circular connector use
the adapter cable Y5a.
The speaker is connected direct to the RRC SP-jack with a 3.5 mm stereo plug.
Paddles are connected to the PAD jack. If you the paddles have a ¼” plug on your paddle
use the supplied ¼” to 3.5 mm adapter cable.
Connect the CAT 5 cable from the Ethernet jack to your switch or router
Connect the 12V power supply to the DC jack
Radio-RRC:
Connect the RS-232 cable Y6d from the Radio-RRC COM2 connector to the radios CAT
connector.
