USER MANUAL
m crob t
RRC-1258 MKII
Ba1258B_RemoteRig_MkIIs-A30
Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. A30
– 2014 Jan 21
45 of 228
Parameter
Setting
Program mode
Select the program mode depending on connected
radio:
0 = Transparent (for repeater links etc.)
1 = ICOM CI-V (generic)
2 = IC706 (with detached control panel)
3 = FT-8x7, FT-1000 (generic)
4 = Kenwood, Yaesu, Elecraft
5 = TS480/TM-D710 (with detached control panel)
6 =
(*1)
7 = IC-R2500/IC-2725(with detached control panel)
8 = TS-2000/TM-D700 (TS-2000 with RC-2000)
9 = IC-2820 (with detached control panel)
10 = Yeasu FT-950/FT-2K/FT-5K/FT-9K- Twin
11 = Transparent, 4-wire (for repeater links etc.)
12 = DX-SR8 (with detached control panel)
13 = ID-E880(with detached control panel)
14 = K3 twin
15 = Yaesu FT-857 (with detached control panel)
16 = Yaesu FT-100 (with detached control panel)
17 = Yaseu FTM-350 (with detached control panel)
(*1)
These selections are only possible in special
editions of the RRC.
Sip password
Protect your remote rig and should be same in both
ends. Normally shown as **** click on the “show”
button to view the password.
(default: no password)
Sip contact
Control-RRC:
Sets the fixed IP address or the Dynamic DNS “own
host name” to the Radio-RRC
Auto connect
Control-RRC:
When enabled the Control-RRC will connect to
Radio-RRC immediately after power up in program
mode 0, 1, 3 and 4.
No (default)
Yes
