USER MANUAL
m crob t
RRC-1258 MKII
Ba1258B_RemoteRig_MkIIs-A30
Microbit 2.0 AB 2010. All rights reserved
a
User manual
Rev. A30
– 2014 Jan 21
51 of 228
Parameter
Setting
COM1 mode
Select mode for COM1-to-COM1 transparent transfer
of serial data between two opposite RRC. The setting
defines the event that triggers the data transfer over
Internet.
Inactive (default)
Mode 1 = Char-by-char. A data packet is send for
each char, needs lot of bandwidth.
Mode 2 = ICOM CI-V. Used for CI-V control of
IC-703/706 at the same time as you
use the control panel.
Mode 3 = Char-timeout. A data packet is sent
when there is a pre-defined pause
between two received char.
Mode 4 = Kenwood, Yaesu, Elecraft. Used for CAT
control of TS-480 or TS-2000 at the
same time as you use the control panel.
Mode 5 = User-def-terminator. Used if you want
to define the terminator char by your-
self (see below).
Should be activated together with Mode-7
in Radio-RRC to combine data from COM1
with the other ports described above.
