MicroBoards Technology Copywriter Flash Duplicator, User Manual

9

TOTAL:  11/0 
Pass:  11           Fail:  0 

[01]            USB  3858M 
FAT32                3669M 

Controller            Buffer 
Firmware Version 

TOTAL:  11/0 
Pass:  11           Fail:  0 

Copy                   3669M 
10%       0:53        367M 

Synchronous Duplication

If the entire source content cannot be stored in the memory buffer, Synchronous duplication 
will be required.   
Place your master card into the reader port and your blank 
cards into the recorder ports. 
Press the 

OK

 button on the controller interface.  If all 

recorder ports are filled, duplication will begin.  If not, the display will show how many target 
cards are in place; press 

OK

 again to begin duplication to the loaded target cards. 

The data will now be copied to the blank cards. 
When the job is completed, the green LED above the 
recorder ports will show a steady green and the cards can 
be removed. 
When each Synchronous duplication cycle completes, you must replace all cards and press 
the 

OK

 button to restart duplication. 

Compare 

The Compare function is used to compare the master card with the copied cards.  Like Copy, 
Compare can be performed Asynchronously or Synchronously. 
Place your master card into the reader port and your copied cards into the recorder ports.   
Press the 

OK

 button on the controller interface.  The 

duplicator will now compare the master and copied cards.  
When completed, the display will read: 

Copy & Compare 

The Copy and Compare function will perform both operations, one after the other.  If the Copy 
portion passes without errors, the system will automatically start the Compare process.  Like 
Copy, Copy & Compare can be performed Asynchronously or Synchronously. 
Place your master card into the reader port and your blank cards into the recorder ports.  Press 
the 

OK

 button on the controller interface. 

The duplicator will first copy the master card to the blank cards. 
When the Copy completes, the unit will start the Compare process.  If Asynchronous duplication 
is being performed, the LED will blink quickly above each card as the Copy phase is in progress.  
During the Compare phase, the LED will blink slowly. 
When the job is completed, the totals will be provided. 

Information 

The Information function displays information on each card placed in the card ports as well as the 
System Information. 

Card Info 

Press the 

OK

 button and the card in the reader port is 

analyzed before the information is displayed.  The top line 
indicates the port, the type of card, and the total capacity 
of the card.  The second line indicates the format and the 
used capacity of the card.  Press the 

▼▲

 buttons to access each card port. 

System Info

Press the 

OK

 button to view the Controller model, the 

Buffer size, and the Firmware version of the duplicator.