DSR DVD Premium Pro Rack Mount Series MICROBOARDS TECHNOLOGY, LLC
19
Setup Menu
1.
At the COPY START? (DISC to DISC) menu, press the NO key until the display
shows SETUP? (MODE CHANGE)
SETUP?
(MODE CHANGE)
2.
Press the Yes button
3.
The first setup option is Mode Select, followed by Copy DISC to HD/DISC,
Write Speed, ISRC Check, Copy Quantity, Session Mode, Drive Inquiry,
Firmware Version and Exit.
4.
Pressing the No key will allow you to move from menu to menu.
5.
Pressing the Yes button will allow you to view or change the configuration of the
system.
6.
Please follow the flow chart on page 7 to navigate through the different menus.
Here is a description of each setup menu item:
Mode Select:
COPY - Duplication from master disc to blank disc, or HDD to blank disc if master data
is registered.
VERIFY - It compares a copied disc with the master disc.
COPY+V - Copying in the COPY+VERIFY mode
Copy DISC TO HD/DISC:
Default setting is OFF. When set to ON, this allows you to copy the master disc to a hard
drive partition AND blank discs.
DVD WR Speed:
Available speeds range from 16x down to 1x.
CD WR Speed:
Available speeds range from 48x down to 4x.
ISRC Check:
Default setting is ON. This feature will copy the ISRC codes from the Master audio disc
to the blank discs.
Copy Quantity:
Set up the number of disc you want to copy.
YES: Moves the cursor position to the next place value.
NO: Select the number from 9 to 0 for each place value.
