Microboards Technology, LLC
8
Main Menu
This section provides an overview of the menu options. These menu options are explained in
detail in the Using the Premium & Premium Pro Series Duplicator section starting on page 10.
Copy
Use the
Copy
menu to make CD and DVD copies. Before you start a copy, make sure
you have selected the correct Master Source.
Test
Use the
Test
menu to simulate the copy process. With simulation, write once recordable
discs such as DVD-R, or CDR will be reusable.
Note: DVD+R recordable media is not compatible with simulation mode. If you try to
simulate DVD+R copying, you will encounter failure messages. If you are using
Rewritable discs as your blank media during the simulation, the content on those
discs will be permanently erased.
Compare
Use the Compare function to perform a bit-by-bit comparison between the content of your
master disc and the contents of all discs it copied. This ensures that all of your copies are
identical to original master disc.
Note: The bit-by-bit comparison will only apply on all DVDs and Data CDs. The
readability check will be applied for other formats like Audio CDs, CD+G, and
Video CDs discs due to their lack of error correction mechanisms.
Test + Copy
Use the
Test + Copy
menu option to simulate the copying process initially. Then, the
duplicator performs the copy process on the blank disc(s) that passed the simulation.
Copy + Compare
Use the
Copy + Compare
menu option to make 100% reliable copies. After the copy
process is done, the duplicator automatically compares the copies from the content of
your original master disc.
Select Burn Speed
Use the
Select Burn Speed
menu option to adjust the duplication speed for the various
blank disc formats. For additional information, see
Select Burn Speed
on page 12.
Select Source
Use the
Select Source
menu option to specify which drive is being used as the master
drive. You should always select the DVD-ROM drive or the hard drive (if available) as
the source unless there is a specific need to use one of the recorders as the master
drive.
Erase
Use the
Erase
menu to erase your Rewritable discs.
Hard Drive Setup (Premium Pro Only)
This menu item will not appear if the External Connection setting is ON.
Use the
Hard Drive Setup
menu to access the Hard Drive functions. You can scroll
between the various options using the
▲
Up
or
▼
Down
button. For information on the
Hard Drive Setup functions, please see page 12.
1. Select
Partition
2. Load
Partition
3. Rename
Partition
4. Delete
Partition
5. Partition
Info
6. Select Loading Drive
7. Format
Hard
Drive
Mix Audio Tracks
Use the
Mix Audio Tracks
menu option to select and burn specific tracks from Audio CDs
onto your blank CDs. This function will not operate if CD+G Support is
ON
(page 19).
