background image

DVD Premium Series                                                    MICROBOARDS TECHNOLOGY, LLC 
 

 
 

19

 

 
 

Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s 
authority to operate this equipment. 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference 

in a residential installation.  This equipment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna 

 

Increase the separation between the equipment and antenna 

 

Connect the equipment into an outlet on a circuit different than that to which the receiver is connected 

 

Consult the dealer or an experienced radio/TV technician for help 

This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following European 
standards: EN 55022, EN 55024.  The CE mark has been affixed in accordance with the CE Marking Directive 
93/68/EEC. 

 

Canadian Department of Communications (DOC) Statement 

This Class B digital apparatus complies with the Canadian ICES-003 Issue 4:2004.  Cet appareil numerique de la classe B est conforme a 

la norme NMB-003 du Canade. 


 

 
 
 

 
 

Summary of Contents for DVD Premium Series




















Reviews: