MicroBoards Technology GX-2, User Manual

6 

Input Rods 

Output Bin 

System Requirements 

The Microboards GX-2 Disc Publisher has the following minimum requirements and compatibilities: 

Operating System 

Mac OS 10.5 or above.  

Processors 

Intel Processor is required. 

System Memory 

Minimum 512 MB of system memory. 1GB is recommended for DVD recording operation.  

Hard Drive 

A separate internal 7200 RPM hard drive is recommended for storing your data.  Using the same 
hard drive as the operating system can cause the system to perform slowly. 

USB Connection 

USB 2.0 is required.  USB 1.1 is not supported, as using USB 1.1 will result in significantly longer 
recording times and the potential for recording failures. 

Assembly and Installation 

Assembly Instructions 

GX-2 Disc Publisher Assembly 

Remove the GX-2 Disc Publisher system from the shipping box and 
confirm you received all of the items. 

Place the GX-2 Disc Publisher on a stable, flat surface.  You will need 
room both in front and to the left of the system, as discs will be 
accessed from both locations. 

The input bin posts are pre-installed, with the wide post to the front. 

The Reject Bin is pre-installed on the left side of the GX-2 Disc 
Publisher.  This bin, which slides out, should be emptied when you 
know discs have been rejected. 

Slide the 50-disc Output Bin into the channel between the feet at the 
front of the GX-2 Disc Publisher, shown below.