MicroBoards Technology GX-2, User Manual

8 

Loading Discs 

The next step is to load your GX-2 Disc Publisher with output discs.  The system will accept CD or 
DVD 120 mm (12 cm) inkjet printable discs.  If the disc does not have an inkjet printable surface, the 
ink will not adhere to the surface of the disc.  The GX-2 Disc Publisher will only accept 12 cm discs.  
Business card or 8 cm discs are not supported by this system. 

    Figure 1 

                Figure 2 

Load the first 5 or 6 discs flat, as seen in figure 1. 

Load the rest of the discs at an angle, against the wide input rod, as seen in figure 2. 

The GX-2 Disc Publisher will hold a maximum of 50 discs.  DO NOT load more than 50 discs in the 
system, as this may cause the discs to feed incorrectly. 

Front Panel Power Button 

The AC power switch located on the back of the GX-2 Disc Publisher must be turned on first in order 
to supply power to the Front Panel. 

The Power button on the front panel of the GX-2 Disc Publisher turns the GX-2 
Disc Publisher Printer on and off.  It may take a few seconds for the GX-2 Disc 
Publisher Printer to turn on after you press the Power button.  The green light at 
the base of the Power button flashes when the printer is processing. 

This switch does not affect power to the drive within the GX-2 Disc Publisher.