QD-DVD Series
11
Microboards B.30
4. Test+Copy
Microboards B.30
5. Copy+Compare
Microboards B.30
6. Select Burn Speed
Microboards B.30
7. Select Source
Microboards B.30
8. Erase
Test + Copy
The Test + Copy function first simulates the burn to the media
and then burns to the media if the Test simulation is successful.
DVD +R media does not support test mode.
Copy + Compare
The Copy + Compare function first burns to the media and then
runs a comparison of the burned discs to the master disc.
Select Burn Speed
This menu option allows you to change the duplication speed for
each of the duplication job types. Available burn speeds will
vary, depending on the model of the recorder drives installed in
your duplicator. Press the
ENT
button to change burn speeds.
Since speeds can be set based on media type being used or whether the hard drive is being used
as the source, press the
▼▲
buttons to navigate to the duplication type whose burn speed you
wish to change, then press the
ENT
button. Use the
▼▲
buttons again to display the burn
speed you would like to choose and press
ENT
.
When you have changed the burn speed, press
ESC
to return to the main menu.
Select Source
Use this menu to select which drive will be used as the master
drive, in which you would load your master disc. By default, the
top drive is set as the source.
Press the
ENT
button to change the source drive. Use the
▼▲
buttons to navigate through the
drives, pressing
ENT
when the drive you want to use is shown.
It is not recommended that you change the source to anything other than the top drive or the hard
drive unless it is necessary to do so.
Additionally, you should never select the bottom drive as the source, as this drive is used for the
USB External Connection. If the External Connection is active, the bottom drive will not be
available and the source drive will be reassigned to one of the other drives in the duplicator.
Erase
This menu option is used to erase rewritable media placed in the
recorder drives. The Erase function has 2 options:
¾
Full Erase:
This option erases the entire disc,
destroying all previously written data in the process.
¾
Quick Erase:
This option erases the index (TOC) of the Rewritable disc, not the data
section. It is much faster than Full Erase. However, the data section is still recoverable.
If you prefer the old content not to be recovered for security purpose, please perform
Full Erase.
Hard Drive Setup
This menu option is only available if you purchased your QD-DVD Series Duplicator with the
optional hard drive. It is used to access the Hard Drive functions.
If it is not already set so, you will be asked if you want the set the hard drive as the source. Press
the
ENT
button to set the hard drive as the source and enter the Hard Drive Setup menu.
1. Select Partition
This function is used to select the default partition on the hard drive for duplication.
Use the
▼▲
buttons to move between the available partitions, pressing the
ENT
button when the partition you want is displayed. The partition selected will become the
first that is displayed after you press the
ENT
button when the display reads
1. Copy
.
