Figure 5-13. Z-Axis Peak RSSI
11. Click the
Measure
button to have the fob perform an internal RSSI measurement and display the results in the
“Measured Int. RSSI” field. This measurement is performed by an internal current source, which drives each of
the fob’s 3-axis LF antenna coil circuits (see the following figure).
Note:
When using the ATA5293-XPRO, the X-10013-002 antenna positioning is the same as the LF antenna
module.
12. Click the
Next
button.
ATAN0219
System Operation
©
2020-2022 Microchip Technology Inc.
and its subsidiaries
User Guide
DS50003051B-page 26