1.
Kit Overview
The ATWILC3000 Shield is a shield board containing the low-power ATWILC3000-MR110CA 802.11 b/g/n
IoT module. By default, the ATWILC3000 Shield is configured to use with the SDIO interface which is
compatible with SAMA5D4-XULT.
Figure 1-1. ATWILC3000 Shield Evaluation Kit Overview
Raspberry
Pi
40-pin Connector
Wi-Fi
UART
Debug
I2C
Current
Measurement
Header
External
Power
Supply
Arduino
Compatible
Headers
32 KHz Crystal Oscillator
Power & Status LED
ATWILC3000-MR110CA
Module
The ATWILC3000 Shield can also be configured to use with other host MCU boards using SPI peripheral
interface exposed through Arduino compatible connectors. For more details, see
for
the list of supported boards and related documents.
ATWILC3000
Kit Overview
©
2018 Microchip Technology Inc.
User Guide
DS50002769A-page 4
