background image

3. 

Design Documentation and Relevant Links

The following list contains links to the most relevant documents and software available for the
ATWILC3000 Shield.

Xplained Boards

 is a series of small-sized and easy-to-use evaluation kits for microcontrollers and

other products. It consists of low-cost MCU boards for evaluation and demonstration of features
and capabilities of different MCU families.

Atmel Studio

 provides a free Atmel IDE for development of C/C++ and assembler code for

microcontrollers.

Data Visualizer

 is a program used for processing and visualizing data. The Data Visualizer can

receive data from various sources, such as the embedded debugger data gateway interface found
on Xplained Pro boards and COM ports.

ATWILC3000

 page provides information and documentation on the Microchip ATWILC3000-

MR110CA module.

ATWILC3000 Wireless Wiki

 page is an online directory to access source code and documentation

for the ATWILC3000.

SMART SAMA5 ARM

®

 Cortex

®

 based MPUs

 page is an online directory to access the tools and

software for SAMA5 Cortex-A5-Based Embedded MPUs.

 ATWILC3000

Design Documentation and Relevant Links

©

 2018 Microchip Technology Inc.

 User Guide

DS50002769A-page 6

Summary of Contents for ATWILC3000 Shield




















Reviews: