ATWINC15x0 Smart Device
Kit
Wi-Fi
®
Smart Device Enablement Kit Developer's Guide
Introduction
This document describes the Wi-Fi Smart Device Enablement Kit development, which is supported by the
ATWINC15x0 Wi-Fi Network Controller (WINC) module that enables the developer to demonstrate the
functionalities of the ATWINC15x0 module for Internet of Things (IoT) applications.
This kit is pre-programmed with an application for demonstrating connectivity to the Microchip AWS
®
IoT
account with the help of an Amazon Alexa
®
and a mobile application. The developer can collect the data
to control the LEDs on the kit using cloud-based voice service virtual assistant such as Amazon Echo
Dot
®
. The mobile application is used for board registration, network configuration, and controlling and
monitoring the Wi-Fi Smart Device Enablement Kit.
For the demonstration shown in this document, the Wi-Fi Smart Device Enablement Kit is pre-configured
with the following:
• Customized MCU firmware
• AWS cloud configuration
• Alexa Skill setting
• Mobile application configuration
However, the developers can create and set up their own private AWS account, configure MCU firmware,
and build custom Alexa Skill with the help of this document.
Features
• ATWINC15x0, Qualified IEEE
®
802.11 b/g/n Network Controller Module
• On-Board Host Microcontroller (SAML21G18B) for Easy Operation and Feature Demonstration
• On-Board CryptoAuthentication
™
(ATECC608A) Device for Secure Connection to AWS
• On-Board Li-Ion/Li-Po Charge Management Controller (MCP73833) for Lithium Battery Charging
• On-Board High Power Supply Rejection (PSRR) Low Dropout (LDO) Regulator (MIC5317)
• On-Board Environment Sensor (BME280)
• On-Board Light Sensor (VEML6030)
©
2019 Microchip Technology Inc.
User Guide
DS50002885A-page 1
