PIC32MZ DA FAMILY STARTER
KIT USER’S GUIDE
2017 Microchip Technology Inc.
DS70005311A-page 7
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
PIC32MZ DA Family Starter Kit. Items discussed in this chapter include:
•
•
Conventions Used in this Guide
•
•
•
Development Systems Customer Change Notification Service
•
•
DOCUMENT LAYOUT
This document describes how to use the PIC32MZ DA Family Starter Kit (also referred
to as “starter kit”) as a development tool to emulate and debug firmware on a target
board. This user’s guide is composed of the following chapters:
•
provides a brief overview of the starter kit, highlighting
its features and uses.
•
provides the hardware descriptions of the starter kit.
•
provides a block diagram, board layouts, and
detailed schematics of the starter kit.
•
Appendix B. “Bill of Materials”
provides the bill of materials for the components
used in the design and manufacture of the starter kit.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(
www.microchip.com
) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
X IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
