manualshive.com logo in svg

Microchip Technology dsPIC30F6010, Datasheet

The Microchip Technology dsPIC30F6010 is a powerful digital signal controller ideal for a variety of applications. Access the datasheet and user manual for free download at 88.208.23.73:8080. Experience advanced features and exceptional performance with this innovative product. Stay ahead with the dsPIC30F6010.

Share
Download
background image

dsPIC30F6010

DS70119B-page 160

Advance Information

 2004 Microchip Technology Inc.

23.14 PICSTART Plus Development 

Programmer

The PICSTART Plus development programmer is an
easy-to-use, low-cost, prototype programmer. It con-
nects to the PC via a COM (RS-232) port. MPLAB
Integrated Development Environment software makes
using the programmer simple and efficient. The
PICSTART Plus development programmer supports
most PICmicro devices up to 40 pins. Larger pin count
devices, such as the PIC16C92X and PIC17C76X,
may be supported with an adapter socket. The
PICSTART Plus development programmer is CE
compliant.

23.15 PICDEM 1 PICmicro

Demonstration Board

The PICDEM 1 demonstration board demonstrates the
capabilities of the PIC16C5X (PIC16C54 to
PIC16C58A), PIC16C61, PIC16C62X, PIC16C71,
PIC16C8X, PIC17C42, PIC17C43 and PIC17C44. All
necessary hardware and software is included to run
basic demo programs. The sample microcontrollers
provided with the PICDEM 1 demonstration board can
be programmed with a PRO MATE II device program-
mer or a PICSTART Plus development programmer.
The PICDEM 1 demonstration board can be connected
to the MPLAB ICE in-circuit emulator for testing. A
prototype area extends the circuitry for additional appli-
cation components. Features include an RS-232
interface, a potentiometer for simulated analog input,
push button switches and eight LEDs.

23.16 PICDEM.net Internet/Ethernet 

Demonstration Board

The PICDEM.net demonstration board is an Internet/
Ethernet demonstration board using the PIC18F452
microcontroller and TCP/IP firmware. The board
supports any 40-pin DIP device that conforms to the
standard pinout used by the PIC16F877 or
PIC18C452. This kit features a user friendly TCP/IP
stack, web server with HTML, a 24L256 Serial
EEPROM for Xmodem download to web pages into
Serial EEPROM, ICSP/MPLAB ICD 2 interface con-
nector, an Ethernet interface, RS-232 interface and a
16 x 2 LCD display. Also included is the book and
CD-ROM 

“TCP/IP Lean, Web Servers for Embedded

Systems,”

 by Jeremy Bentham

23.17 PICDEM 2 Plus 

Demonstration Board

The PICDEM 2 Plus demonstration board supports
many 18, 28 and 40-pin microcontrollers, including
PIC16F87X and PIC18FXX2 devices. All the neces-
sary hardware and software is included to run the dem-
onstration programs. The sample microcontrollers
provided with the PICDEM 2 demonstration board can
be programmed with a PRO MATE II device program-
mer, PICSTART Plus development programmer, or
MPLAB ICD 2 with a Universal Programmer Adapter.
The MPLAB ICD 2 and MPLAB ICE in-circuit emulators
may also be used with the PICDEM 2 demonstration
board to test firmware. A prototype area extends the
circuitry for additional application components. Some
of the features include an RS-232 interface, a 2 x 16
LCD display, a piezo speaker, an on-board temperature
sensor, four LEDs and sample PIC18F452 and
PIC16F877 Flash microcontrollers.

23.18 PICDEM 3 PIC16C92X 

Demonstration Board

The PICDEM 3 demonstration board supports the
PIC16C923 and PIC16C924 in the PLCC package. All
the necessary hardware and software is included to run
the demonstration programs.

23.19 PICDEM 4 8/14/18-Pin 

Demonstration Board

The PICDEM 4 can be used to demonstrate the capa-
bilities of the 8, 14 and 18-pin PIC16XXXX and
PIC18XXXX MCUs, including the PIC16F818/819,
PIC16F87/88, PIC16F62XA and the PIC18F1320
family of microcontrollers. PICDEM 4 is intended to
showcase the many features of these low pin count
parts, including LIN and Motor Control using ECCP.
Special provisions are made for low-power operation
with the supercapacitor circuit and jumpers allow on-
board hardware to be disabled to eliminate current
draw in this mode. Included on the demo board are pro-
visions for Crystal, RC or Canned Oscillator modes, a
five volt regulator for use with a nine volt wall adapter
or battery, DB-9 RS-232 interface, ICD connector for
programming via ICSP and development with MPLAB
ICD 2, 2 x 16 liquid crystal display, PCB footprints for
H-Bridge motor driver, LIN transceiver and EEPROM.
Also included are: header for expansion, eight LEDs,
four potentiometers, three push buttons and a proto-
typing area. Included with the kit is a PIC16F627A and
a PIC18F1320. Tutorial firmware is included along with
the User’s Guide.

Summary of Contents for dsPIC30F6010































































































































































































































Reviews:

No comments

Related manuals for dsPIC30F6010

Gardena 4030 Operating Instructions Manual preview
4030
Brand: Gardena Pages: 17
SAFI DN15 Manual preview
DN15
Brand: SAFI Pages: 18
Badger Meter Orion Series Quick Start Manual preview
Orion Series
Brand: Badger Meter Pages: 2
Badger Meter MDS 2000 Installation And Software Manual preview
MDS 2000
Brand: Badger Meter Pages: 48
Badger Meter BadgerTouch HREBT Manual preview
BadgerTouch HREBT
Brand: Badger Meter Pages: 12
Badger Meter CB-30 User Manual preview
CB-30
Brand: Badger Meter Pages: 16
Caen V793 Technical Information Manual preview
V793
Brand: Caen Pages: 20
Danfoss FP735Si Installation Manual preview
FP735Si
Brand: Danfoss Pages: 20
Danfoss CP715 Si Installation & User'S Instructions preview
CP715 Si
Brand: Danfoss Pages: 36
Danfoss TM70 Installation Manual preview
TM70
Brand: Danfoss Pages: 2
Danfoss IKORE Installation Manual preview
IKORE
Brand: Danfoss Pages: 2
Danfoss Ikompact User Manual preview
Ikompact
Brand: Danfoss Pages: 12
Danfoss FP735Si User Manual preview
FP735Si
Brand: Danfoss Pages: 24
Danfoss WS103 User Manual preview
WS103
Brand: Danfoss Pages: 60
Danfoss EKC 366 Manual preview
EKC 366
Brand: Danfoss Pages: 10
Danfoss CF-RC Instruction preview
CF-RC
Brand: Danfoss Pages: 20
Quectel EC21 Series Hardware Design preview
EC21 Series
Brand: Quectel Pages: 95
ICAS ICAS User Manual preview
ICAS
Brand: ICAS Pages: 51

Brands by name

Popular brands

Load more brands