EVB-LAN9252-3PORT
ETHERCAT
®
ESC PHY CONNECTION
MODE USER’S GUIDE
2015 Microchip Technology Inc.
DS50002403A-page 7
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
EVB-LAN9252-3PORT. Items discussed in this chapter include:
•
•
Conventions Used in this Guide
•
•
Development Systems Customer Change Notification Service
•
•
DOCUMENT LAYOUT
This document describes how to use the EVB-LAN9252-3PORT as a development tool
for the Microchip LAN9252 EtherCAT
®
slave controller. The manual layout is as
follows:
•
– Shows a brief description of the
EVB-LAN9252-3PORT.
•
– Includes details and instructions for using the
EVB-LAN9252-3PORT.
•
Chapter 3. “Board Configuration”
– Describes the various
EVB-LAN9252-3PORT board features, including jumpers, LEDs, test points, sys-
tem connections, and switches.
•
Appendix A. “EVB-LAN9252-3PORT Evaluation Board”
– This appendix
shows the EVB-LAN9252-3PORT.
•
Appendix B. “EVB-LAN9252-3PORT Evaluation Board Schematics”
– This
appendix shows the EVB-LAN9252-3PORT schematics.
•
Appendix C. “Bill of Materials (BOM)”
– This appendix includes the
EVB-LAN9252-3PORT Bill of Materials (BOM).
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
