Microchip Technology MRF24WN0MA Manual Download

Page: 24 / 37

MRF24WN0MA/MB

DS50002410A-page 24

Advance Information



2015 Microchip Technology Inc.

• European Telecommunications Standards Insti-

tute (ETSI):

http://www.etsi.org

• European Radio Communications Office (ERO):

http://www.ero.dk/

• The Radio and Telecommunications Terminal

Equipment Compliance Association (R&TTE CA):

http://www.rtteca.com/

TABLE 4-1:

MRF24WN0MA/MB EUROPEAN COMPLIANCE TESTING

4.4

Australia

The Australia radio regulations do not provide a modu-
lar approval policy similar to the United States (FCC)
and Canada (IC). However, MRF24WN0MA/MB mod-
ule RF transmitter test reports can be used in part to
demonstrate compliance in accordance with ACMA
Radio communications “Short Range Devices” Stan-
dard 2004 (The Short Range Devices standard calls up
the AS/NZS 4268:2008 industry standard). The
MRF24WN0MA/MB module test reports can be used
as part of the product certification and compliance
folder. For more information on the RF transmitter test
reports, contact Microchip Technology Australia sales
office.
To meet overall Australian final product compliance, the
developer must construct a compliance folder contain-
ing all relevant compliance test reports e.g. RF, EMC,
electrical safety and DoC (Declaration of Conformity)
etc. It is the responsibility of the integrator to know what
is required in the compliance folder for ACMA compli-
ance. All test reports are available on the
MRF24WN0MA/MB product web page at

http://

www.microchip.com

. For more information on Australia

compliance, refer to the Australian Communications
and Media Authority web site

http://www.acma.gov.au/

4.4.1

EXTERNAL ANTENNA
REQUIREMENTS

The compliance testing listed in

Table 4-1

was per-

formed using the antenna types listed in

Table 3-1

4.4.2

HELPFUL WEB SITES

The Australian Communications and Media Authority:

www.acma.gov.au/

4.5

New Zealand

The New Zealand radio regulations do not provide a
modular approval policy similar to the United States
(FCC) and Canada (IC). However, MRF24WN0MA/MB
module RF transmitter test reports can be used in part
to demonstrate compliance against the New Zealand
“General User Radio License for Short Range
Devices”. New Zealand Radio communications (Radio
Standards) Notice 2010 calls up the AS / NZS
4268:2008 industry standard. The MRF24WN0MA/MB
module test reports can be used as part of the product
certification and compliance folder. All test reports are
available on the MRF24WN0MA/MB product web page
at

http://www.microchip.com

. For more information on

the RF transmitter test reports, contact Microchip Tech-
nology sales office.
Information on the New Zealand short range devices
license can be found in the following web links:

http://www.rsm.govt.nz/cms/licensees/types-oflicence/
general-user-licences/short-range-devices

and

http://www.rsm.govt.nz/cms/policy-and-planning/spec-
trum-policy-overview/legislation/gazette-notices/prod-
uct-compliance

To meet overall New Zealand final product compliance,
the developer must construct a compliance folder con-
taining all relevant compliance test reports e.g. RF,
EMC, electrical safety and DoC (Declaration of Confor-
mity) etc. It is the responsibility of the developer to
know what is required in the compliance folder for New
Zealand Radio communications. For more information
on New Zealand compliance, refer to the web site

http://www.rsm.govt.nz/

Certification

Standards

Article Laboratory

Report

Number

Date

Safety

EN 60950-1:2006+A11:2009+A1:2010 +A12:2011 [3.1(a)]

Pending

Health

EN 62479:2010