Microchip Technology MRF24WN0MA, Manual



 2015 Microchip Technology Inc.

Advance Information

DS50002410A-page 25

MRF24WN0MA/MB

4.5.1

EXTERNAL ANTENNA 
REQUIREMENTS

The compliance testing listed in 

Table 4-1

 was per-

formed using the antenna types listed in 

Table 3-1

.

4.6

Japan

The MRF24WN0MA/MB module has received type
certification and is labeled with its own technical confor-
mity mark and certification number as required to con-
form to the technical standards regulated by the
Ministry of Internal Affairs and Communications (MIC)
of Japan pursuant to the Radio Act of Japan. 
Integration of this module into a final product does not
require additional radio certification provided installa-
tion instructions are followed and no modifications of
the module are allowed. Additional testing may be
required:
• If the host product is subject to electrical appli-

ance safety (for example, powered from an AC 
mains), the host product may require Product 
Safety Electrical Appliance and Material (PSE) 
testing. The integrator should contact their confor-
mance laboratory to determine if this testing is 
required.

• There is an voluntary Electromagnetic Compatibil-

ity (EMC) test for the host product administered 
by VCCI: 

http://www.vcci.jp/vcci_e/index.html

4.6.1

LABELING AND USER 
INFORMATION REQUIREMENTS

The label on the final product which contains the
MRF24WN0MA/MB module must follow Japan
marking requirements. The integrator of the module
should refer to the labeling requirements for Japan
available at the Ministry of Internal Affairs and
Communications (MIC) website. 
The MRF24WN0MA/MB module is labeled with its own
technical conformity mark and certification number.
The final product in which this module is being used
must have a label referring to the type certified module
inside:

4.6.2

EXTERNAL ANTENNA 
REQUIREMENTS

The compliance testing was performed using the

antenna types listed in 

Table 3-1

.

4.6.3

 4.6.2 HELPFUL WEB SITES

Ministry of Internal Affairs and Communications (MIC):

http://www.tele.soumu.go.jp/e/index.htm

Association of Radio Industries and Businesses
(ARIB): 

http://www.arib.or.jp/english/ 

4.7

Korea

The MRF24WN0MA/MB module has received certifica-
tion of conformity in accordance with the Radio Waves
Act. Integration of this module into a final product does
not require additional radio certification provided instal-
lation instructions are followed and no modifications of
the module are allowed.

4.7.1

LABELING AND USER 
INFORMATION REQUIREMENTS

The label on the final product which contains the
MRF24WN0MA/MB module must  follow  KC  marking
requirements. The integrator of the module should refer
to the labeling requirements for Korea available on the
Korea Communications Commission (KCC) website. 
The MRF24WN0MA/MB module is labeled with its own
KC mark. The final product requires the KC mark and
certificate number of the module:

4.7.2

EXTERNAL ANTENNA 
REQUIREMENTS

The Korea compliance testing was performed using

the antenna types listed in 

Table 3-1

.

4.7.3

HELPFUL WEB SITES

Korea Communications Commission (KCC): 

http://www.kcc.go.kr

National Radio Research Agency (RRA): 

http://rra.go.kr

Contains transmitter module with certificate number: 

Pending

MSIP-CRI-029-RN4020 

Pending