background image

 2015 Microchip Technology Inc.

Advance Information

DS50002410A-page 35

Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE

Microchip disclaims all liability

arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights unless otherwise stated.

Trademarks

The Microchip name and logo, the Microchip logo, dsPIC, 
FlashFlex, flexPWR, JukeBlox, K

EE

L

OQ

, K

EE

L

OQ

 logo, Kleer, 

LANCheck, MediaLB, MOST, MOST logo, MPLAB, 
OptoLyzer, PIC, PICSTART, PIC

32

 logo, RightTouch, SpyNIC, 

SST, SST Logo, SuperFlash and UNI/O are registered 
trademarks of Microchip Technology Incorporated in the 
U.S.A. and other countries.

The Embedded Control Solutions Company and mTouch are 
registered trademarks of Microchip Technology Incorporated 
in the U.S.A.

Analog-for-the-Digital Age, BodyCom, chipKIT, chipKIT logo, 
CodeGuard, dsPICDEM, dsPICDEM.net, ECAN, In-Circuit 
Serial Programming, ICSP, Inter-Chip Connectivity, KleerNet, 
KleerNet logo, MiWi, MPASM, MPF, MPLAB Certified logo, 
MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code 
Generation, PICDEM, PICDEM.net, PICkit, PICtail, 
RightTouch logo, REAL ICE, SQI, Serial Quad I/O, Total 
Endurance, TSHARC, USBCheck, VariSense, ViewSpan, 
WiperLock, Wireless DNA, and ZENA are trademarks of 
Microchip Technology Incorporated in the U.S.A. and other 
countries.

SQTP is a service mark of Microchip Technology Incorporated 
in the U.S.A.

Silicon Storage Technology is a registered trademark of 
Microchip Technology Inc. in other countries.

GestIC is a registered trademark of Microchip Technology 
Germany II GmbH & Co. KG, a subsidiary of Microchip 
Technology Inc., in other countries. 

All other trademarks mentioned herein are property of their 
respective companies.

© 2015, Microchip Technology Incorporated, Printed in the 
U.S.A., All Rights Reserved. 

ISBN: 978-1-63277-670-9

Note the following details of the code protection feature on Microchip devices:

Microchip products meet the specification contained in their particular Microchip Data Sheet.

Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the 
intended manner and under normal conditions.

There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our 
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data 
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

Microchip is willing to work with the customer who is concerned about the integrity of their code.

Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not 
mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2009 certification for its worldwide 

headquarters, design and wafer fabrication facilities in Chandler and 

Tempe, Arizona; Gresham, Oregon and design centers in California 

and India. The Company’s quality system processes and procedures 

are for its PIC

®

 

MCUs and dsPIC

®

 DSCs, K

EE

L

OQ

®

 

code hopping 

devices, Serial EEPROMs, microperipherals, nonvolatile memory and 

analog products. In addition, Microchip’s quality system for the design 

and manufacture of development systems is ISO 9001:2000 certified.

QUALITY

 

MANAGEMENT

  

SYSTEM

 

CERTIFIED

 

BY

 

DNV

 

== 

ISO/TS

 

16949

 

==

 

Summary of Contents for MRF24WN0MA






































Reviews: