1.7
Safety Information
Read the safety information before using the PoE midspan unit.
1.7.1
General Guidelines
Read the following safety information before carrying out any installation, removal, or maintenance procedure on the
PoE midspan. Warnings contain directions to be followed for the safety of personal and product.
1.7.2
Warnings
• Read installation instructions in
3. PoE Midspan Unit Installation (Outdoor Unit)
before connecting midspan unit
to its power source.
• Follow basic electricity safety measures when connecting the PoE midspan unit to its power source.
• Only trained and qualified personnel must be allowed to install, replace, and service this equipment.
• A voltage mismatch can damage the equipment and can pose a fire hazard. If voltage indicated on the label is
different from the power outlet voltage, do not connect midspan unit to this outlet.
• All wiring and connections must conform to NFPA 70 (NEC).
• Power supply cord must not be attached to the building surface or run through walls, ceilings, floors, and similar
openings in the building structure.
• Measures must be taken to prevent physical damage to the power supply cord, including proper routing.
• Data and Data and Power ports of the midspan unit are shielded RJ45 data sockets. They cannot be used as
Plain Old Telephone Service (POTS) sockets. Only connect RJ45 data connectors to these sockets.
• When disposing this product, follow all local laws and regulations.
PD-9501-xxGCO/AC
Standards and Safety Guidelines
©
2022 Microchip Technology Inc.
and its subsidiaries
User Guide
DS50003340A-page 4