3.3.2.2
Pole Mounting
Before installing the midspan, ensure that all the items listed in the
are available in the kit. If any item
is missing, notify your Sales or Customer Service Representative from Microchip.
Follow the procedure to mount the unit on a pole using a mounting bracket.
1.
Attach the pole bracket to the midspan using four pan head screws and tighten the pan head screws to 1.1
Nm.
2.
Place the midspan/pole bracket assembly onto the pole. Tighten the midspan/pole bracket assembly to the
pole using worm clams, as shown in the following figures.
Notes:
• Pole bracket supports poles with diameters ranging from 60 mm to 200 mm (2.5 inches to 8 inches).
• The unit must be installed with DATA IN, and DATA & PWR OUT ports facing down, as shown in the
following figures.
PD-9501-xxGCO/AC
PoE Midspan Unit Installation (Outdoor Unit)
©
2022 Microchip Technology Inc.
and its subsidiaries
User Guide
DS50003340A-page 9