3.1.7
Connecting the RJ45 Cable
The following steps describe the installation of RJ45 cable to the midspan.
1.
Remove the upper cap, blank plug, and washer from the
Data In
port.
2.
Insert the cable through the upper cap and the washer and plug into the
Data In
port.
3.
Slide the washer and the upper cap towards the midspan and hand-tighten the upper cap onto the
Data In
port.
4.
Repeat step
to connect the RJ45 cable to the
Data and PWR Out
port.
Note:
Use cable up to 5 Gig Cat 5e and above outdoor grade.
PD-9501-5GCO/DC
PoE Midspan Installation (Outdoor Model)
©
2021 Microchip Technology Inc.
and its subsidiaries
User Guide
DS00004336A-page 13