3.1.8
Connection
Note:
The midspan has no ON-OFF switch, simply plug the midspan into an DC power source.
Follow the steps below to connect the midspan to the data and power source.
1.
Connect the
Data In
(input) jack from the midspan to remote Ethernet network (item 2 in the following figure).
2.
Connect the
Data and PWR Out
(output) jack from the midspan to the terminal (item 3 in the following figure).
3.
Connect DC power lines from the
Line In
terminal (item 1 in the following figure) to main DC power. Ensure
that the power outlet is nearby and easily accessible.
Note:
Connect the midspan to a weather-proof DC power source box that meets ratings IP66 and IP67.
Number
Label
Description
1
LINE IN
Power Input, 12 V
DC
–24 V
DC
2
DATA IN
Data In to the Ethernet (network) switch
3
DATA & PWR OUT
Data and Power Out to the Ethernet terminal
PD-9501-5GCO/DC
PoE Midspan Installation (Outdoor Model)
©
2021 Microchip Technology Inc.
and its subsidiaries
User Guide
DS00004336A-page 14
