1.7
Safety Information
Read the safety information before using the PoE Midspan unit.
1.7.1
General Guidelines
Read the following safety information before carrying out any installation, removal, or maintenance procedure on the
PoE Midspan. Warnings contain directions to be followed for the safety of personal and product.
1.7.2
Warnings
• Read installation instructions in
3. PoE Midspan Installation (Outdoor Model)
before connecting Midspan to its
power source.
• Follow basic electricity safety measures when connecting the PoE Midspan to its power source.
• Only trained and qualified personnel must be allowed to install, replace, and service this equipment.
• A voltage mismatch can damage the equipment and can pose a fire hazard. If voltage indicated on the label is
different from the power outlet voltage, do not connect Midspan to this outlet.
• All wiring and connections must comply with NFPA 70 (NEC) and state and local regulatory requirements.
• Power supply cord must not be attached to the building surface or run through walls, ceilings, floors, and similar
openings in the building structure.
• Measures must be taken to prevent physical damage to the power supply cord, including proper routing.
• Data and Data and Power ports of the Midspan are shielded RJ45 data sockets. They cannot be used as Plain
Old Telephone Service (POTS) sockets. Only connect RJ45 data connectors to these sockets.
• When disposing this product, follow all local laws and regulations.
PD-9501-5GCO/DC
Standards and Safety Guidelines
©
2021 Microchip Technology Inc.
and its subsidiaries
User Guide
DS00004336A-page 4
