3.
PoE Midspan Installation (Outdoor Model)
The following sections describe the procedures for the installation of the Midspans unit.
Note
: Do not use cross-over cable between the PoE Midspan output port and load device.
Warnings
:
1.
Take extra care when connecting the DC power inlet terminals, so that the
+ve
and
–ve
terminals are
connected to the proper polarity.
2.
Ensure the DC power is within the allowed range.
3.
Earth ground screw must be connected to earth ground in all types of installations.
3.1
Installation Overview
Figure 3-1. Product Overview
PD-9501-5GCO/DC
PoE Midspan Installation (Outdoor Model)
©
2021 Microchip Technology Inc.
and its subsidiaries
User Guide
DS00004336A-page 6