manualshive.com logo in svg

Microchip Technology PIC24FV16KM204 FAMILY, Datasheet

The Microchip Technology PIC24FV16KM204 FAMILY offers exceptional performance and versatility for various industrial applications. Access its comprehensive Datasheet and user manual for a deeper understanding of this product's capabilities. Easily download these resources for free from 88.208.23.73:8080, empowering you with all the necessary technical information to maximize your experience with this advanced technology.

Share
Download
background image

 2013 Microchip Technology Inc.

Advance Information

DS33030A-page 13

PIC24FV16KM204 FAMILY

1.0

DEVICE OVERVIEW

This document contains device-specific information for
the following devices:

The PIC24FV16KM204 family introduces many new
analog features to the extreme low-power Microchip
devices. This is a 16-bit microcontroller family with a
broad peripheral feature set and enhanced computa-
tional performance. This family also offers a new
migration option for those high-performance applica-
tions which may be outgrowing their 8-bit platforms, but
do not require the numerical processing power of a
Digital Signal Processor (DSC).

1.1

Core Features

1.1.1

16-BIT ARCHITECTURE

Central to all PIC24F devices is the 16-bit modified
Harvard architecture, first introduced with Microchip’s
dsPIC

®

 Digital Signal Controllers. The PIC24F CPU

core offers a wide range of enhancements, such as:
• 16-bit data and 24-bit address paths with the 

ability to move information between data and 
memory spaces

• Linear addressing of up to 16 Mbytes (program 

space) and 16 Kbytes (data)

• A 16-element working register array with built-in 

software stack support

• A 17 x 17 hardware multiplier with support for 

integer math

• Hardware support for 32-bit by 16-bit division
• An instruction set that supports multiple address-

ing modes and is optimized for high-level 
languages, such as C

• Operational performance up to 16 MIPS

1.1.2

POWER-SAVING TECHNOLOGY

All of the devices in the PIC24FV16KM204 family incor-
porate a range of features that can significantly reduce
power consumption during operation. Key features
include:
• On-the-Fly Clock Switching, to allow the device 

clock to be changed under software control to the 
Timer1 source or the internal, low-power RC 
oscillator during operation, allowing users to 
incorporate power-saving ideas into their software 
designs.

• Doze Mode Operation, when timing-sensitive 

applications, such as serial communications, 
require the uninterrupted operation of peripherals, 
the CPU clock speed can be selectively reduced, 
allowing incremental power savings without 
missing a beat.

• Instruction-Based Power-Saving Modes, to allow 

the microcontroller to suspend all operations or 
selectively shut down its core while leaving its 
peripherals active with a single instruction in 
software.

1.1.3

OSCILLATOR OPTIONS AND 
FEATURES

The PIC24FV16KM204 family offers five different oscil-
lator options, allowing users a range of choices in
developing application hardware. These include:
• Two Crystal modes using crystals or ceramic 

resonators.

• Two External Clock modes offering the option of a 

divide-by-2 clock output.

• Two Fast Internal oscillators (FRCs), one with a 

nominal 8 MHz output and the other with a 
nominal 500 kHz output. These outputs can also 
be divided under software control to provide clock 
speed as low as 31 kHz or 2 kHz.

• A Phase Locked Loop (PLL) frequency multiplier, 

available to the external oscillator modes and the 
8 MHz FRC oscillator, which allows clock speeds 
of up to 32 MHz.

• A separate internal RC oscillator (LPRC) with a 

fixed 31 kHz output, which provides a low-power 
option for timing-insensitive applications.

The internal oscillator block also provides a stable ref-
erence source for the Fail-Safe Clock Monitor (FSCM).
This option constantly monitors the main clock source
against a reference signal provided by the internal
oscillator and enables the controller to switch to the
internal oscillator, allowing for continued low-speed
operation or a safe application shutdown.

• PIC24FV08KM101

• PIC24F08KM101

• PIC24FV08KM102

• PIC24F08KM102

• PIC24FV16KM102

• PIC24F16KM102

• PIC24FV16KM104

• PIC24F16KM104

• PIC24FV08KM202

• PIC24F08KM202

• PIC24FV08KM204

• PIC24F08KM204

• PIC24FV16KM202

• PIC24F16KM202

• PIC24FV16KM204

• PIC24F16KM204

Summary of Contents for PIC24FV16KM204 FAMILY

















































































































































































































































































































































Reviews:

No comments

Related manuals for PIC24FV16KM204 FAMILY

Eastern Times Technology BT-100 Quick Start Manual preview
BT-100
Brand: Eastern Times Technology Pages: 4
Vacon 10 Quick Manual preview
10
Brand: Vacon Pages: 18
wattio AIR Read Me preview
AIR
Brand: wattio Pages: 20
Eaton AMPGARD RVSS Instruction For Installation And Maintenance preview
AMPGARD RVSS
Brand: Eaton Pages: 16
Kamstrup M-Bus Manual preview
M-Bus
Brand: Kamstrup Pages: 36
YASKAWA J1000 CIMR-JC series Option Manual preview
J1000 CIMR-JC series
Brand: YASKAWA Pages: 26
Netafim AlphaDisc BLE Quick Manual preview
AlphaDisc BLE
Brand: Netafim Pages: 4
TREND IQ422 Installation Instructions Manual preview
IQ422
Brand: TREND Pages: 12
DeLaval MPCII Memo preview
MPCII
Brand: DeLaval Pages: 102
IDTECK Star FINGER006 User Manual preview
Star FINGER006
Brand: IDTECK Pages: 51
UCS SYNCHRO QUASAR AC User Manual preview
SYNCHRO QUASAR AC
Brand: UCS Pages: 10
Curtis MultiMode 1214-8 Manual preview
MultiMode 1214-8
Brand: Curtis Pages: 41
Morningstar SUNSAVER SS-10-12V Installation And Operation Manual preview
SUNSAVER SS-10-12V
Brand: Morningstar Pages: 26
NovaStar NovaPro UHD Manual preview
NovaPro UHD
Brand: NovaStar Pages: 11
DAPAudio IPS-VC3 User Manual preview
IPS-VC3
Brand: DAPAudio Pages: 11
Akytec SMI200 User Manual preview
SMI200
Brand: Akytec Pages: 15
Parker Sporlan 952567 Installation And Operation Instructions Manual preview
Sporlan 952567
Brand: Parker Pages: 24
Ekinex EK-FF1-TP Quick Start Manual preview
EK-FF1-TP
Brand: Ekinex Pages: 4

Brands by name

Popular brands

Load more brands