PIC24FV16KM204 FAMILY
DS33030A-page 178
Advance Information
2013 Microchip Technology Inc.
REGISTER 15-2:
UxSTA: UARTx STATUS AND CONTROL REGISTER
R/W-0
R/W-0
R/W-0
U-0
R/W-0, HC
R/W-0
R-0, HSC
R-1, HSC
UTXISEL1
UTXINV
UTXISEL0
—
UTXBRK
UTXEN
UTXBF
TRMT
bit 15
bit 8
R/W-0
R/W-0
R/W-0
R-1, HSC
R-0, HSC
R-0, HSC
R/C-0, HS
R-0, HSC
URXISEL1
URXISEL0
ADDEN
RIDLE
PERR
FERR
OERR
URXDA
bit 7
bit 0
Legend:
HC = Hardware Clearable bit
HS = Hardware Settable bit
C = Clearable bit
HSC = Hardware Settable/Clearable bit
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 15,13
UTXISEL<1:0>:
UARTx Transmission Interrupt Mode Selection bits
11
= Reserved; do not use
10
= Interrupt when a character is transferred to the Transmit Shift Register (TSR) and as a result, the
transmit buffer becomes empty
01
= Interrupt when the last character is shifted out of the Transmit Shift Register; all transmit operations
are completed
00
= Interrupt when a character is transferred to the Transmit Shift Register (this implies there is at least
one character open in the transmit buffer)
bit 14
UTXINV:
IrDA
®
Encoder Transmit Polarity Inversion bit
If IREN =
0
:
1
= UxTX Idle ‘
0
’
0
= UxTX Idle ‘
1
’
If IREN =
1
:
1
= UxTX Idle ‘
1
’
0
= UxTX Idle ‘
0
’
bit 12
Unimplemented:
Read as ‘
0
’
bit 11
UTXBRK:
UARTx Transmit Break bit
1
= Sends Sync Break on next transmission – Start bit, followed by twelve ‘
0
’ bits, followed by Stop bit;
cleared by hardware upon completion
0
= Sync Break transmission is disabled or completed
bit 10
UTXEN:
UARTx Transmit Enable bit
1
= Transmit is enabled; UxTX pin is controlled by UARTx
0
= Transmit is disabled; any pending transmission is aborted and the buffer is reset; UxTX pin is
controlled by the PORT register
bit 9
UTXBF:
UARTx Transmit Buffer Full Status bit (read-only)
1
= Transmit buffer is full
0
= Transmit buffer is not full, at least one more character can be written
bit 8
TRMT:
Transmit Shift Register Empty bit (read-only)
1
= Transmit Shift Register is empty and the transmit buffer is empty (the last transmission has
completed)
0
= Transmit Shift Register is not empty; a transmission is in progress or queued
bit 7-6
URXISEL<1:0>:
UARTx
Receive Interrupt Mode Selection bits
11
= Interrupt is set on an RSR transfer, making the receive buffer full (i.e., has 4 data characters)
10
= Interrupt is set on an RSR transfer, making the receive buffer 3/4 full (i.e., has 3 data characters)
0x
= Interrupt is set when any character is received and transferred from the RSR to the receive buffer;
receive buffer has one or more characters
Summary of Contents for PIC24FV16KM204 FAMILY
