PRECISE-LOG Data Loggers User’s Manual
Page 7/57
EN62311:2008
EN60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
ETSI EN300 328 V1.8.1 (2012-06)
ETSI EN 301 489-1 V1.9.2 (2011-09)
ETSI EN 301 489-17 V2.2.1 (2012-09)
For WIFI enabled models:
Contains FCC ID:2ACZO-WIFI1232T
All PRECISE-LOG Series data loggers comply with Part15 of the FCC Rules. Operation is
subject to the following two conditions:
1.
These devices may not cause harmful interference, and
2.
These devices must accept any interference received, including interference that may cause
undesired operation.
1.3 Care of the logger
PRECISE-LOG data loggers are designed to work in humid atmospheres of up to 95% RH non-
condensing. They should be protected against immersion. The environment temperature should
be within – 40 to +70°C (-40 to + 158°F).
1.4 Identity of the logger
Each logger has its own unique serial number, which can be found on the back of the enclosure.
The serial number is used to identify the logger and enable us to keep a record of its history like
calibrations and warranty. Please reference it in any correspondence with MEI.
1.5 Battery
The battery lasts in excess of 10 years when sampling at 1-minute intervals in stand-alone
mode. When the battery is nearing the end of its service life, the on-board status LED will glow
in amber each time the logger is sampling the data.
The battery indicator on the status window
in SiteView software will also display warning of low battery level. The battery operates
approximately one or two weeks from the time the logger first indicates a low battery, but we
recommend that the battery be changed as soon as the warning is displayed. The battery is
factory replaceable only.
