DTMR3-TX
Doc. N°
MO-0377-ING
Copyright 2010
Data
01.04.2009
Rev.
0
Pag.
23
of
87
14.2. Password
The password is requested every time the user wishes to modify any password protected parameter
(example “1I>” menu “Setting”).
The factory default password is “ 1111 “.
The password is only modifiable by “MSCom 2” software (see Manual “MSCom 2”).
When password is requested, proceed as follows:
1
Use the keys
“
Increase
” and
“
Decrease
” to set the
first digit of password.
5
Use the key
“
Increase
” or
“
Decrease
” to set the
third digit.
2
Press “
Next
”
to validate and go to
the next digit.
6
Press “
Next
”
to validate and go to
the next digit.
3
Use the key
“
Increase
” or
“
Decrease
” to set
second digit.
7
Use the key
“
Increase
” or
“
Decrease
” to set the
fourth digit.
4
Press “
Next
”
to validate and go to
the next digit.
8
Press “
Next
”
to validate and go to
modify the next
parameter.
By key “
Prev
” go back to previous digit.
The password validity expires 60 sec after the last
setting modification or as soon as you go back to
the main menu
1
If set the incorrect
password the display
shows
“
! Wrong code
”.
2
The display will
repeat the initial
interrogation
