2
Driver Pre-Installation
The USB drivers should be installed before the MicroLink HART modem is
connected to the PC’s USB port. A er the drivers are installed, Windows will
automa cally detect the modem when it is connected to the USB port and
complete the setup.
To pre-install the drivers, run
Msetup.exe
from the included CD. The CD will auto-run
this
fi
le if the Windows autorun feature is
enabled for your CD drive.
Msetup.exe HART protocol modem setup utility
Install USB driver before
connec ng to the USB port.
Important!
Click the
Install
bu on in the 101-0032 window to pre-install the USB drivers.
The driver installer will guide you through the setup process.
Installers can also be run manually from the CD, without running Msetup, by
running
\
x86\dpinst.exe
fi
le for 32 bit opera ng systems or
x\64\dpinst.exe
for 64
bit opera ng systems.
Don’t have a CD drive?
Download the HART Protocol CD image from
www.micro
fl
x.com/pages/support
Running the
fi
le will self-extract the compressed
fi
les and
start the Msetup.exe HART Protocol Setup U lity.
