Microlab, A Wireless Telecom Group Company, 25 Eastmans Road, Parsippany, NJ 07054
Tel: (973) 386-9696 • sales@microlabtech.com • www.microlabtech.com • Fax: (973) 386-9191
The LNAs (low noise amplifiers) inside the
GPSS216
provide a +10dB
system gain. Gain is defined as the ratio in the amount of RF power
of the output and input of the
GPSS216
.
1. Verify all unused outputs are terminated with 50Ω loads.
2. Set
Gain Select
switch to the +10dB position (maximum gain)
3. Verify signal level at the ouput is sufficient for the next system
stage
Gain Select
GPSS216 Quick Start Guide
Lossless GPS Signal Splitter, 16 RF Ouput
page 7
Sequence to Disconnect:
1.
Turn Down
gain (Set
Gain Select
switch to the 0dB position)
2.
Switch OFF
the unit
3. Remove/Disconnect DC power to the device
4. Disconnect the RF (input/output) connections of the unit.
5. Disconnet Ground
6. Unmount Unit
Disconnecting/Uninstalling
Gain Select
Switch