Microlab, A Wireless Telecom Group Company, 25 Eastmans Road, Parsippany, NJ 07054
Tel: (973) 386-9696 • sales@microlabtech.com • www.microlabtech.com • Fax: (973) 386-9191
Disclaimer
GPS and GNSS re-transmission to an antenna requires regulatory approval. These approvals are granted on an
individual basis by regulating bodies. Microlab cannot grant these approvals, and cannot be held responsible
for violating these regulations using the system.
The FCC requires commercial users within the US to acquire and maintain a Part 5 experimental license to
re-broadcast GPS signals. Licenses are not required if they are inside an RF shielded environment. European
regulations vary by country. Consult local authorities for additional details.
Contact Microlab - Active Solutions
To contact Microlab, visit our website at www.microlabtech.com or send email to sales@microlabtech.com.
For operating assistance in the USA, call (973) 386-9696.
Safety Information
To avoid possible electric shock or personal injury, the following general safety precautions must be observed
during all phases of operation, service, or repair of the Microlab Unit . Failure to comply with these precautions
or with specific warnings in this guide violates the safety standards of design, manufacture, and intended
use of the Microlab Unit. Microlab assumes no liability for the customer’s failure to comply with these require
-
ments.
GPSS216 Quick Start Guide
Lossless GPS Signal Splitter, 16 RF Ouput
