Maintenance
Periodically clean the protective light filter and illuminator's case.
Use a scrub or a brush to clean the case. Water may be used if needed.
The light filter cleaning is done with a wet cotton cloth. Continuously change the contacting surface of a cloth to avoid filter's
damage.
Never use dissolvents or chemical reagents to clean this product!
Safety measures
IR-1 Illuminator complies with EN60065:2001+Amd1: Audio, Video & similar electronic equipment: Safety requirements
and maximum permissible exposure limits of IEC60825-1.This product conforms to EMC Directive 89/336/EEC as amended by
92/31/EEC and 93/68/EEC. CLASS 1M LED product.
Invisible LED radiation! Do not look directly into optical magnifiers.
Storage rules
The illuminator should be stored in a closed space away from acid vapors or alkali mist. Ambient air temperature should be from
–50°C to +50°C; relative humidity should not exceed 95% at 25°C.
