background image

M0070 Professional Preamp User Guide 1.0 

8  

©2009 Microlynx Systems Ltd. 

Limited Warranty 

Microlynx Systems Ltd. (Microlynx) warrants this product to be free from defects in workmanship or 
materials under normal use. The period of this warranty is two years from date of purchase, and covers 
both parts and labor. 

Microlynx’ responsibilities under this warranty are, at its sole option, to repair or replace without charge 
any defective component(s) in the product. This obligation shall not arise until the buyer returns the 
product to Microlynx.  

To obtain warranty service, the purchaser must first contact Microlynx to obtain a Return Merchandise 
Authorization (RMA).  Microlynx will not accept any returns without an RMA. 

The buyer shall return the product in an adequate container, with transportation and insurance prepaid.  If 
a defect is found that is covered by this warranty, Microlynx will pay for standard surface return shipping 
and insurance.    

If repairs are required that are not covered by this warranty, Microlynx will notify the purchaser with an 
estimate of the repair costs, and requires prepayment for the repair, shipping and insurance costs before 
the product will be repaired. If the product is found not to be defective, Microlynx retains the right to 
charge the buyer for testing expenses, at Microlynx’ standard hourly rates in effect at that time. 

This product contains no user serviceable parts. This warranty shall be void if the product is opened. This 
warranty does not cover damages or losses resulting from physical abuse, neglect, misuse, shipping, 
improper installation, improper environment, extreme temperature conditions, or power line irregularities. 

Microlynx assumes no responsibility for this product being used in a hazardous or dangerous manner, 
either alone or in conjunction with other equipment.   

Except as stated herein, the product is provided as is, without warranty of any kind, express or implied, 
including but not limited to any implied warranties of merchantability or fitness for a particular purpose. To 
the maximum extent permitted by law, in no event shall Microlynx be liable for any damages, including, 
without limitation, lost profits, lost savings, loss of business information, business interruption, or any 
other incidental or consequential damages arising out of the use, misuse, or inability to use the product.  
In no event shall Microlynx’ liability exceed the purchase price of the specific product purchased and 
against which a claim is made. 

This warranty gives the buyer specific legal rights, and the buyer may also have other rights which vary by 
province or state. 

 

Summary of Contents for M0070









Reviews: