background image

Show Instrument Log

DVVA II 4000

6-14                                                    

400-42803-01 (Rev B) - July 2017

Show Instrument Log

Select this option to display a log of recent analyses, calibrations, and errors or messages. This 
information is recorded automatically by the software. By default, information for analyses and 
messages are retained 60 days, and calibration information for 90 days. You may change the time 
for which this information is retained in the [Unit 1] section of the WIN4000.INI file.

Analysis 
Calibration
Message 

Select the type of entries to display in the instrument log. For 
example, if you select 

Analysis

, only Analysis operations are 

displayed.

Add Log Entry

Use this push button to enter analysis and/or sample criteria (not 
recorded automatically by the analysis program) that you wish 
to display in the Instrument Log report. You can make multiple 
entries by selecting this push button as many times as you wish.

Report

Enables you to print or display on the screen a report of log 
entries; the Log Report Settings dialog is displayed.

Summary of Contents for DVVA II 4000































































































































































































































































Reviews: